Dimensions (LxH):
Outside: 62.5 x 32.5 cm / Inside: 59.2 x 29.2 cm
Material:
Float glass, wood, PMMA
Colour:
crystal clear, white
Content:
1x ant farm 20mm panel spacing with wall mounting
1x cover
1x wooden frame painted white with Magner closure
2x spacer strips for nest inserts
6x screws and dowels (for wood / stone wall)
Connection:
2 x 14/16/18/20 x 20mm socket
14/10 hose is put tightly into socket 14mm
20/16 hose is put tightly onto first 16mm stage
Description:
These ant farms have been developed for wall mounting and are easy to mount on wood and stone walls.
The frame is made of real natural wood, with a white finish in a modern, timeless design.
This frame can be removed to open the farm and can be attached via a magnet holder back to the farm.
Installation note:
To fix the 6 dowels "S6" in the wall you need a Drilling machine with a 6mm drill (for wood or stone depending on the material).
Drill 40mm deep holes for the dowels and screw in the 4x30mm screws in.
Please note: Glass is cut according to DIN 1249 with a tolerance of +/;- 1mm. With extremely small ant species, additional ant escape protection is essential.
Note about the ant farm
The following must be observed when attaching or removing flexible tubes:
If the flexible tube is very difficult to fit on the connector socket, the socket should be lightly rubbed with a drop of our ant escape protection oil or powder. The flexible tube should then be pushed onto the connector socket by turning resp. screwing without loading the socket with up and down movements. The same applies when removing the flexible tube from the ant farm. Please do not just pull it out!
