Dimensions: 19x19x1,4cm; Through height 7mm; Through width 4-20mm with soft transition
Material: acrylic glass, plaster, pvc foil
Color: crystal clear, precious wood print
Includes:
5x Acrylic plates 19x19cm (incl. Loamboard)
14x screws M4 in transparent
14x nuts M4 in transparent
2x connection sockets 10mm transparent
2x Formicarium cap for 10mm socket
1x frame ring
1x mesh insert 27mm made of stainless steel
Connection: 2x connection sockets 6mm for hose 14/10mm
Description: Flatformicarium made of several layer plates and a special loamboard for the wetness of the nest. Via the integrated connection sockets, the Formicarium can be extended via hoses or connected with an antsarena. In the middle part of the nest there is a free area which serves as an access to the humidification plate but is also suitable for the placement of feeding bowls. This free area is covered by a frame ring. (Optionally, this frame ring can be coated with an anti-corrosion agent (oil, varnish or powder) from the inner side of the frame so that the animals can not escape through the opening.
Application: for ants of size M
Note: Slots of 0.5mm can occur.
Note about the connection sockets
The following must be observed when attaching or removing flexible tubes:
If the flexible tube is very difficult to fit on the connector socket, the socket should be lightly rubbed with a drop of our ant escape protection oil or powder. The flexible tube should then be pushed onto the connector socket by turning resp. screwing without loading the socket with up and down movements. The same applies when removing the flexible tube. Please do not just pull it out!
