Dimensions: 9x9x2.8cm; Through height 10mm; Through width 10-20mm
Material: acrylic glass, plaster
Color: White, transparent
Includes:
5x Acrylic plates 9x9cm (incl. Plasterboard)
4x screws M4 in white
4x nuts M4 in white
2x connection sockets 10mm transparent
2x Formicarium cap for 10mm socket
1x Formicarium plag for 27mm hole
Connection: 2x connection sockets 10mm for hose 14 / 10mm
Description: Flatformicarium made of several layer plates and a special plasterpoint for the wetness of the nest. Via a wick in the plasterpoint it is possible to supply the nest with water, without opening it. This small nesting area is especially suitable for experiments or observations in the lab or in school.
Application: for ants of size M
Note: Slots of 0.5mm can occur.
The following must be observed when attaching a flexible tubes to the connector socket of the ANTCUBE - PF Lab:
If the flexible tube is very difficult to fit on the connector socket, the socket should be lightly rubbed with a drop of our ant escape protection oil or powder. The flexible tube should then be pushed onto the connector socket by turning resp. screwing without loading the socket with up and down movements.
