Components suitable for our formicariums

Here you will find connection options for ant nests and formicariums, grid inserts or plugs for the openings, padding and escape protection means so that your ants stay in the formicarium.
 

The right connectors:

fits into a 10mm hole:
- Basin hose connector 10mm - transparent

fits into a 27mm hole:
- Basin connector for hole 27 and hose 10-16 mm - M25 (nut extra!)
- Basin hose connector 27mm - 14, 16, 20 mm - transparent
- Basin hose connector 3/4 "to 20mm - straight - gray
- Basin hose connector 3/4 "to 20mm - angle - gray
- Basin hose connector 3/4 "to 20mm - straight - transparent
- Basin hose connector 3/4 "to 20mm - angle - transparent
- Basin pipe connector 3/4 "to 32mm - straight - gray
- Basin pipe connector 3/4 "to 40mm - straight - gray
- Basin pipe connector 3/4 "to 50mm - straight - gray
- Basin pipe connector 3/4 "to 32mm - straight - transparent
- Basin pipe connector 3/4 "to 40mm - straight - transparent
- Basin pipe connector 3/4 "to 50mm - straight - transparent

fits into a 50mm hole:
- Formicarium screw socket for 50mm bore - gray
- Formicarium screw socket for 50mm bore - transparent

fits to a 4 / 6mm socket S:
- a hose 4 / 2mm (into the socket)
- a hose 8-9 / 9mm (on the socket)

fits to an 8 / 10mm socket M:
- a hose 8-9 / 6mm (into the socket)
- a hose 14 / 19mm (on the socket)

fits to a 14/16 / 20mm socket L:
- a hose 14 / 10mm (into the socket)
- a hose 20 / 16mm (on the socket)

fits to a 32mm socket:
- a socket 32mm = for a pipe 32 / 28mm
In order to expand to a 40 / 36mm or 50 / 46mm tube, there are suitable adapters from 32mm to 40mm and from 40mm to 50mm.

In order to connect hoses of the same size, there are suitable hose connectors in the angular shapes: I, L, T, Y, X in the corresponding dimensions.
In order to connect tubes of the same size, there are matching tube connectors in the angle shapes I, L, Y, T in the corresponding dimensions.
With our T, I and L pipe connectors made of plastic, it should be noted that a further I piece is required to use all connections. This does not apply to our glass tube connectors.

If you still can't get the right size, you can overcome larger deviations by attaching different hose diameters. (e.g. 10/14 hose on a 10/8 mm hose).
Smaller deviations can be corrected, for example, by wrapping them with adhesive tape.